Network Information Module

Network Interfaces Information Module

This page displays information about the network interfaces installed in your computer.


The exact information displayed is system-dependent. On some systems, this information can not yet be displayed.

The user cannot modify any settings on this page.

Samba Status Information Module

The Samba and NFS Status Monitor is a front end to the programs smbstatus and showmount. Smbstatus reports on current Samba connections, and is part of the suite of Samba tools, which implements the SMB (Server Message Block) protocol, also called the NetBIOS or LanManager protocol.

This protocol can be used to provide printer sharing or drive sharing services on a network including machines running the various flavors of Microsoft® Windows®.

showmount is part of the NFS software package. NFS stands for Network File System and is the traditional UNIX® way to share folders over the network. In this case the output of showmount -a localhost is parsed. On some systems showmount is in /usr/sbin, check if you have showmount in your PATH.


On this page you can see a big list which shows the currently active connections to Samba shares and NFS exports of your machine. The first column shows you whether the resource is a Samba (SMB) share or a NFS export. The second column contains the name of the share, the third the name of the remote host, which accesses this share. The remaining columns have only a meaning for Samba-shares.

The fourth column contains the User ID of the user, who accesses this share. Note that this does not have to be equal to the UNIX® user ID of this user. The same applies for the next column, which displays the group ID of the user.

Each connection to one of your shares is handled by a single process (smbd), the next column shows the process ID (pid) of this smbd. If you kill this process the connected user will be disconnected. If the remote user works from Windows®, as soon as this process is killed a new one will be created, so he will almost not notice it.

The last column shows how many files this user has currently open. Here you see only, how many files he has open just now, you don't see how many he copied or formerly opened etc.


Here you see which Samba- and NFS-shares from other hosts are mounted on your local system. The first column shows whether it is a Samba- or NFS-share, the second column displays the name of the share, and the third shows where it is mounted.

The mounted NFS-shares you should see on Linux® (this has been tested), and it should also work on Solaris™ (this has not been tested).


This page presents the contents of your local Samba log file in a nice way. If you open this page, the list will be empty. You have to press the Update button, then the Samba log file will be read and the results displayed. Check whether the Samba log file on your system is really at the location as specified in the input line. If it is somewhere else or if it has another name, correct it. After changing the file name you have to press Update again.

Samba logs its actions according to the log level (see smb.conf). If loglevel = 1, Samba logs only when somebody connects to your machine and when this connection is closed again. If log level = 2, it logs also if somebody opens a file and if he closes the file again. If the log level is higher than 2, yet more stuff is logged.

If you are interested in who accesses your machine, and which files are accessed, you should set the log level to 2 and regularly create a new Samba log file (e.g. set up a cron task which once a week moves your current Samba log file into another folder or something like that). Otherwise your Samba log file may become very big.

With the four checkboxes below the big list you can decide, which events are displayed in the list. You have to press Update to see the results. If the log level of your Samba is too low, you won't see everything.

By clicking on the header of one column you can sort the list by this column.


On this page you can filter the contents of the third page for certain contents.

Let's say the Event field (not the one in the list) is set to Connection, Service/File is set to *, Host/User is set to *, Show expanded service info is disabled and Show expanded host info is disabled.

If you press Update now, you will see how often a connection was opened to share * (i.e. to any share) from host * (i.e. from any host). Now enable Show expanded host info and press Update again. Now you will see for every host which matches the wildcard *, how many connections were opened by him.

Now press Clear Results.

Now set the Event field to File Access and enable Show expanded service info and press Update again.

Now you will see how often every single file was accessed. If you enable Show expanded host info too, you will see how often every single user opened each file.

In the input lines Service/File and Host/User you can use the wildcards * and ? in the same way you use them at the command line. Regular expressions are not recognized.

By clicking on the header of a column you can sort the list by this column. This way you can check out which file was opened most often, or which user opened the most files or whatever.

Section Author

Module copyright 2000: Michael Glauche and Alexander Neundorf

Originally written by: Michael Glauche

Currently maintained by: Alexander Neundorf


  • Conversion to KControl applet:

    Matthias Hölzer-Klüpfel

  • Use of K3Process instead of popen, and more error checking:

    David Faure

  • Conversion to kcmodule, added tab pages 2,3,4, bug fixed:

    Alexander Neundorf

Documentation copyright 2000 Alexander Neundorf

Documentation translated to docbook by Mike McBride